Custom T-shirt printing process

When the enterprise group orders the T-shirt, it is generally necessary to print the LOGO of the enterprise to highlight the overall image of the enterprise. The following Xiaobian will share the printing process of the customized T-shirt!

The first process: the design provided by the printing designer will be handed over to the professional plate making company, according to the requirements to produce a film, each color will produce a film, so the design of T-shirt color should not be too much, the more color the higher the cost. Send the produced film to the printing factory selenium version, the same color is also a version of selenium. Selenium out of the version to be carefully examined, you can first use white powder printed on the countertop pattern, some places to repair with water.

The second process: mixing the paddle according to the design draft, use the color card to match the corresponding color card number, and no color has the corresponding color description, such as how much proportion of green pigment and yellow pigment is used. Adjust the desired color of glue according to the ratio. Pour the adjusted glue into the screen plate, mix well, press on the T-shirt sheet, and brush one or two times with the wooden plate.

The third process: proofing first positioning, find the center point, as well as the position of the pattern from the neckline, make a mark, the T-shirt cut according to the mark spread on the countertop, the countertop is brush layer glue, the T-shirt cut will stick to the countertop, avoid moving in the printing process. After lifting the wire mesh board, wait for the glue to dry, and then brush the second. After one set of colors is done, brush the second and third sets of colors.